Utilize your existing AR-15 platform with the SIRT-AR Bolt for high volume, sustainable diagnostic training.
TRIGGER PREP TRAINING
The take-up indicator engages when the trigger is “taken-up” and partially pressed, as prepping a trigger is imperative for maximizing accuracy and trigger control. When the trigger is taken-up, the red laser is on, providing a visual awareness of the muzzle movement, and further indicating when the trigger is prepped to the shooter and/or a trainer or firearms instructor.
MAXIMIZE TRIGGER MECHANICS
TAKE-UP AND SHOT INDICATORS WORK FOR EVERYONE
When the simulated sear is “broken” the solid-state internal switching system activates the green, shot-indicating laser providing visual feedback indicating proper trigger follow-through and generally proper grip and trigger mechanics.
Whether your shooting style is target-focused or strict front-sight-focused, the general visual awareness of the lasers provides the requisite feedback to improve shooting mechanics without compromising your vision focal at your desired vision focal length.
SHOT INDICATING LASER WORKS ON ANY TARGET
The short bursts of the green shot indicating laser provide sufficient visual verification to the shooter because of our natural flash visual memory. The use of the first prototypes (which were initially made for individual training by the company’s founders) unveiled the effectiveness of a simple laser shot indicator on practically any target. The green laser can be seen while training outside, allows more training and does not require the hassle, setup and restrictiveness of full-blown expensive target simulation systems. The compact and simple training tool system works.
RESETTING TRIGGER ALLOWS FOR ENGAGING TARGETS IN A CONTINUOUS STRING
An auto-resetting trigger is necessary to reset the internal simulated sear to represent multiple consecutive shots. Traditional dry firing requires racking the slide or cocking the hammer (to shoot in single action mode). The action between shots breaks the natural flow of engaging numerous targets in an array.
MORE SHOTS = MORE TRAINING
The auto-resetting trigger allows for a significantly greater number of quality trigger pulls during a training session.
- Designed for advanced dry fire training indoors
- Convert your AR-15 in 20 seconds (after initial installation)*
- Adjustable shot indicating red laser
- SIRT-AR Bolt works with your upper on your lower
- Replaces your bolt carrier
- Universal to fit all Mil Spec AR Triggers*
- Enables your lower’s trigger to auto-reset
- 50 yard visibility through optics
- Not rackable
- Uses Lithium CR123 Batteries
By replacing your bolt carrier with the SIRT-AR Bolt you will be able to train with a self resetting trigger that activates a shot indicating laser in your rifle. Simply open the rear takedown pin, remove your bolt carrier, insert the SIRT-AR Bolt and trigger bar, close and latch the take down pin and you are ready to train!
With the SIRT-AR Bolt, you can now train shooting with an offset, weapons manipulation, mag changes, presentation shots, transitions from primary to secondary, and strong side to weak side.
*See "install" videos in the videos tab, for first time installation to your AR-15.
**Should fit most after market triggers. Does not work with two stage triggers.